- Product Code: SP96, SP108, SVP108
Description:
-
The Speed Velocity Post is used on concrete construction sites as part of temporary edge protection, installed from floor
- Built to current North American Safety Standards
- Accommodates from 6’6” to 10’8”
- Save time on installation, installs in seconds
- 5 degree margin on installation
- Visual indictor for correct installation and daily inspections
- No tools required for installation
- Galvanized for long lasting durability
- Crated for storage and logistical ease
- Weight: 22 lbs.
to ceiling to support fence in areas with heights from 6′ 6″ to up to 10′ 8″. A fourth generation of safety edge protection post with simplified installation and extended durability that results in increased on site efficiency. It is mostly used on concrete residential structures installed from the floor to ceiling, where it supports the fence.
-
Product Code: KP126, KP136
Description:
-
The Extension Post is used on concrete construction sites as part of temporary edge protection, installed from floor to ceiling to support fence in areas with heights from 8′ 2″ to up to 13′ 6″. It is quick and easy to install and includes an adjustable locking system to automatically secure, stabilize and maintain the post in position.
- Built to current North American Safety Standards
- Accommodates heights from 9’7” to 13’6”
- Saves time on installation, installs in seconds
- 5 degree margin on installation
- Visual indictor for correct installation and daily inspections
- No tools required for installation
- Galvanized for long lasting durability
- Crated for logistics and storage
- Weight: 29 lbs
Product Code: KF9642, KF9621, KF541, KF542
Description: The Fence Panel is structurally designed to secure construction working platforms for a variety of applications. A guardrail systems protection fence can be used either in single or multiple combinations for higher enclosure heights. The Fence easily attaches to a post, shark stand or slab/kerb grab and is quick to dismantle, maneuver, and re-install on another site location where guardrail systems protection needed.
- Built to current North American Safety Standards
- Quick Installation
- Allows for multiple stacking of fence to achieve perimeter heights of 42″,63″,84″
- Built in post locking latch
- Overall dimensions:
- 9’6”W x 42”H (10’ frame)
- 4’9”W x 42”H (5’ frame)
- Built in 4” OSHA toe board (Outside Red)
- Galvanized for long lasting durability
- Purpose built crates for ease of logistics and storage
- Weight 45.2 lbs. / 29 lbs.
Product Code: SG2642, SG2664
Description:
-
The Slab Grab is used as a slab anchor to install safety fence or wooden rails in buildings under construction, clamping to the floor slab where use of a fence post is not possible, such as on a balcony or in work areas where there is a very high/no ceiling.
- Built to current North American Safety Standards
- Post Heights 42″ & 64”
- Bite opening from 3” to 26″
- Visual indictor for correct installation and daily inspections
- No tools required for installation / Perminate Integrated Handle
- Galvanized for long lasting durability
- Purpose built crates for ease of logistics and storage
- Built to accept ISA fence panels
- Integrated slots allow for 2 x 4 woo`d rails
- Weight 32 lbs.
Product Code: KKG21
Description:The Kerb Grab clamps to the outer curb of parapet floor areas of buildings under construction and is used to install safety fences or wooden rails where use of a fence post is not possible.
- Built to current North American Safety Standards
- Post Heights 42″
- Bite opening from 3” to 21″
- Visual indictor for correct installation and daily inspections
- No tools required for installation / Perminate Integrated Handle
- Galvanized for long lasting durability
- Purpose built crates for ease of logistics and storage
- Multipurpose hooks accept ISA Fence or allow for 2 x 4 wood rails
- Weight 27 lbs.
Product Code: SS42
Description: The Shark Stand is a single stand and base unit that provides support for fence or wooden rails on wooden decks or/and concrete floors.
- Built to current North American Safety Standards
- Post Heights 42″
- Secured with nails, screws, or single redhead anchor
- May be anchored to concrete floors, roof or wood decks
- Nailer bar and notching lever ensures correct, secure installation every time
- Multipurpose hooks accept ISA Fence or allow for 2 x 4 wood rails
- Nailer base allows for easy attachment of toe-board
- Purpose built crates for ease of logistics and storage
- Galvanized for long lasting durability
- Weight 14.7 lbs.
Product Code: SB
Description: The Shark Base is a compact base support for 2×4 wooden posts that are needed during construction to support fence or wooden rails on wooden decks or/and concrete floors.
- Built to current North American Safety Standards
- Quick and sturdy anchor for timber post & rail system
- Post support recieves 2 x 4
- Secured with nails, screws, or single redhead anchor
- May be anchored to concrete floors, roof or wood decks
- Nailer bar and notching lever ensures correct, secure installation every time
- Galvanized for long lasting durability
- Weight 9.7 lbs.
Product Code: KFC542, KFC96, KG21, PC96, PC108, PC126, PC136, SGC42, SCG64, SS42
Description: All crates are purpose built to the product it is designed to carry. The crates main purpose is to reduce time handing the product. These crates help with storage, inventory, logistics, and product protection. Galvinized (except the KFC542 & KFC96 – painted) for long lasting durbility, all units have fork guide or lifting hook for stacking.
- Built to current North American Safety Standards
- Protects and extends product life
- Designed with matching incremental quantities
- Allows for efficient distribution and delivery on job sites
- Outfitted with lifting points and fork pockets/ guides
- Stackability reduces storage area
- Ideal for managing inventory
- Galvanized for long lasting durability (except KFC542/KFC96 powder coated)
Product Code: SGH
Description: The system consists of a spring loaded hinge and guide hinge. The hinge attaches to the post at base and top of the gate. Spring loaded it enables the gate to quickly close an exposed opening in the floor.
- Built to current North American Safety Standards
- Easy to install
- No tooling or drilling required
- Works with KF542 and KF9642 panels
- Reliable and reusable
- Galvanized for long lasting durability
- Weight 3 lbs.
Product Code: SPS60
Description: Speed Post Sleeves allow for timber products to be used with conpression post (SP108) or provides the elevation when trades are working at floor level with removing the protection system.
- Built to current North American Safety Standards
- Easy to install
- No tooling or drilling required
- Slips over Speed Velocity Post
- Allows either ISA fence or traditional 2×4 wooden rail
- Allows ISA fence to be constructed either 21″ or 42″ off of the deck allowing tradesmen to work protected from edge and providing access to the edge for knee wall construction, glazing, etc, by reaching underneath.
- Reliable and reusable
- Rust resistant for long life.
- Weight n/a lbs.
